The dimensions of a standard dartboard and set up an electronic dartboard are identical. The height between the floor and the center of the target is the same for each of them, at 5 feet and 8 inches. The only difference between bristle boards and electronic dartboards is the shooting distance, which is 7 feet, 9 inches, and one-fourth of an inch. To clarify, this is the distance from the front of the dartboard to the rear of the oche; measuring from the wall would result in a long distance due to the board’s thickness. It has been confirmed.
The distance between the bullseye’s center and the oche’s rear is 9 feet, 9 inches while using soft-tip darts. This information and more may be found on the official soft-tip darts and electronic dartboard website, darts the world. To begin setting up your electronic dartboard, you’ll need to know the optimal height and distance. Setting up an electronic dartboard is simpler than setting up a wooden dartboard, providing you with more data immediately. Electronic dartboards are more user-friendly than bristle boards because they already have a variety of games preinstalled.
- The process to set up an electronic dartboard
The process to set up an electronic dartboard
Measurements of an electronic dartboard
Having a sense of the intended playing area’s height and depth is the first step in setting up an electronic dartboard. Electronic dartboards are more convenient since they need less effort to set up than traditional wooden ones and provide more data right from the off. Most electronic dartboards come with a collection of games already inbuilt compared to a bristle dartboard, which makes it easier to set up and start playing for beginners.
Electronic dartboard mounting
Electronic dartboards are easier to install than traditional bristle boards since all you need is a drill or screwdriver to attach the panel to the wall using the provided fasteners. A hole for mounting at the top of the backboard is standard for electronic boards, so keep that in mind if you’re looking to buy one or already own one.
Because of this, you’ll need to modify your hanging distance calculation before successfully installing the board. You should be able to make the necessary changes based on the information provided in the user handbook, which should include the extra distance added from the bull to the mounting hole.
Size for electronic dartboards
Electronic dartboards are smaller than their bristle counterparts. The diameter of a typical bristle board is 18 feet, but the diameter of an electronic board is 13.5 to 15.5 feet, which is the worldwide standard.
Power cord for electronic dartboards
The obvious difference between a standard dartboard and an electronic one is that the latter needs electricity. Some boards support both corded and cordless charging options. There may be no other choices on certain boards. Battery power may be preferable if the intended mounting location does not have access to an electrical outlet, or if other electrical complications could make charging the dartboard difficult.
Triple or quadruple aa batteries are typically used to power electronic dartboards. If you are okay with plugging your darts into the wall, this isn’t much of a problem. Still, if you don’t have access to electricity, you should use the charging option to avoid the inconvenience of constantly needing to buy new batteries.
Ideal floor surface for electronic dartboards
The flooring area between the dartboard and the throwing line is very durable. Steel dart tips may damage hardwood floors, so it’s important to play on a mat thick enough to protect them. If you play on concrete floors or any hard surface that might harm your dart tips, it’s a good idea to lay down a protective covering. A rubber or vinyl dart mat is the best solution for your current setup.
Use these mats to keep your darts and the floor safe. Dartboards are generally 30 inches broad and 10 feet long, with a thickness of around 1/4 inch. They are scaled to match your dartboard’s playing area and have printed toe lines at the appropriate distances for firing steel- and foam-tipped darts.
To further restrict the throwing area from the rest of the room, you may use a rubber dart mat if your dartboard is installed in an open location. You can roll up the carpet and put it away after you finish it. In between games, your dartboard may be a stylish addition to your wall décor. One may use a cheap rug or any other soft but sturdy material to offer a protective barrier over the floor. However, you may not need additional flooring if the space is carpeted, as is often the case with completed basements.
When it comes to where you should hang your electronic or bristle dartboard, all you have is good judgment to go on. Ideally, you would put your board in a spot that is out of the way of breakable items like your TVs or window panes. If you have the space, a gaming room is perfect for a dartboard, but I’ve also seen them installed in kitchens and living rooms. If you spend most of your time in the living room watching television, having your board there will be more convenient and, therefore, more likely to encourage you to play.
Throw line setup is used for electronic dartboards
Whether using an electronic dartboard or a more conventional design, you may choose various throw line marking alternatives. Numerous approaches exist for achieving this goal. The oche is traditionally celebrated with tape or a marker. A dart mat with distance markings is an example of a more sophisticated solution.
If you’ve set up your dartboard on a cement floor, this extra padding may prevent your darts from shattering if they fall. since the advent of laser technology, the oche may now be marked with pinpoint accuracy. Those who want a more modern approach can use laser oche. Once set up, it will consistently and reliably emit a red light beam.
Lighting for your electric dartboard setup
Lighting is important while setting up; a well-lit space is ideal. When throwing darts, an unobstructed view of the board is really helpful. Poor lighting is a major problem on the darts board. Having enough lighting for your dartboard is so vital that manufacturers create fixtures. Lights are designed specifically for use around dartboards, giving forth more light than a standard bulb. Since normal lightbulbs cause the board to soften and disintegrate faster, manufacturers have developed led lights specifically for dartboards. Electronic dartboards are even better since they have built-in illumination.
Your electronic dartboard setup choices are extensive. Examine your options and choose the one that works best for you. all you need to hang your dartboard on the wall or attach it to a backing surface is a central screw, a u-shaped hanging bracket, and three spring clips. Using anchors in drywall seems problematic, considering the weight of a high-quality bristle dartboard (at least 10 pounds) and the power of ripping darts from the board regularly.
The dartboard is secured to the wall or backboard through a metal bracket bolted into place. Disc mounting kits eliminate the need for spring clips, which may cause the board to become unlevel and unsecured put down a mat thick enough to resist steel dart points if you have excellent hardwood floors. There are dartboard cabinets available with built-in lighting. Each spotlight should have enough power to illuminate the whole board. It’s important to position the lights so that the dartboard is never in the shade. You should also check that the thrower is not distracted by bright lights.